Integrate ISE with Cisco Prime

In this demonstration I will show you how to add Cisco ISE to Cisco Prime.

The following equipment has been used in this demonstration:

  • Cisco Prime 3.5

  • Cisco ISE 2.6 (Standalone)

Navigate to Administration > Servers > ISE Servers

On the right-hand side of the screen, click on 'Select a command' and select option 'Add ISE Server' followed by 'Go'.

Enter the required settings for your Policy Admin Node (PAN) and click 'Save' once done.

Once complete, return to 'ISE Servers' where you should see the ISE server that you've added.

©2020 by Network Wizkid